TrainCarts/控制牌/属性

« 返回

介绍

属性控制牌可以执行与指令相同的任务，但比指令更强，能够实现全自动化。控制牌需要红石激活才能运行，并且会忽略矿车的所有权，因此如果你只想定位某个你拥有的矿车，请与 switcher（转辙器）控制牌的检测矿车拥有者的功能相结合来使用。

语法

[train]

property

speedlimit

1.5

第二行: property

第三行: 要更改的属性名称

第四行: 要设置的属性的值

布尔语句

属性 'playerenterexit'（玩家进出）由拉杆控制

布尔属性（如玩家进入和列车减速）可以使用语句来判定 true 还是 false。这使得使用红石或基于列车的其他属性来打开或关闭某些项目变得更加容易。

远程控制

远程控制 你可以远程为列车设置属性。假设你的列车名为 train01那么你需要在控制牌上使用以下内容:

[train train01]

property

maxspeed

0.4

属性

可以使用 [cart] 和 [train] 设置以下属性:

属性	值 例子	解释
addtag	tag1	添加一个标签
settag	taga	设置一个标签
remtag	a	移除一个标签
addowner	Maxxue	为列车添加一个车主。
setowner	Maxxue	清除所有车主并将车主设置为所填的玩家。
remowner	Maxxue	从列车上移除一名车主。
destination	station2	设置目的地。
mobenter	false	设置生物是否可以进入。
playerenter	true	设置玩家是否可以进入。
playerexit	yes	设置玩家是否可以离开。
playerenterexit playerexitenter	yes	使用相同的值，同时设置玩家是否可以进入和玩家是否可以离开。
spawnitemdrops spawndrops killdrops	true	设置矿车被破坏时是否掉落物品。 当禁用时，也会禁用箱子矿车和漏斗矿车的物品掉落。

只能使用 [train] 设置以下属性:

Property	Value example	Meaning
name setname rename	Intercity#A	Sets a new name on the train. The #-sign is replaced with a number 1 to infinity.
dname setdname displayname setdisplayname	Trainname	Sets the display name used with trigger signs (%triggernameN%)
exitoffset exitlocation exityaw exitpitch exitrotation	2/0/0 200/45/-2333 30 0 90	Change player exit offset, yaw, pitch and rotation. Exit location uses absolute coordinates, exit offset relative to the cart(s).
speedlimit maxspeed	0.6	The maximum allowed speed the train can go
pushing<ref name="collision">Old syntax for compatibility. Replaced by typecollision. See Collision modes</ref>	false	Set if the train pushes mobs, players, trains and misc
pushmobs<ref name="collision"/>	true	Set if the train pushes mobs
pushplayers<ref name="collision"/>	no	Set if the train pushes players
pushmisc<ref name="collision"/>	yes	Set if the train pushes misc (items, boats, etc.)
playercollision mobcollision traincollision misccollision	default cancel kill killnodrops push enter link	Set a collision mode for the train against players, mobs, trains or other types of entities.
slowdown	false	Set if the train slows down, either by gravity or by friction
slowfriction	false	Set if the train slows down due to friction
slowgravity	false	Set if the train slows down, or speeds up, due to gravity
gravity	1.0	Changes the acceleration and deceleration due to gravity (multiplier, 1.0 is default)
linking	deny	Set if the train can link with other trains
collision	allow	Set if the train can collide with other entities
keepcloaded loadchunks keeploaded	true	Set if the train keeps nearby chunks loaded
default setdefault	stat1def	Load one of the default train properties found in DefaultTrainProperties.yml into this train
banking	1 0	Change the banking (First number: Strength, Second number: Smoothness)
godmode invincible	true	Makes a train invincible, so that players cannot destroy it by hitting it. Players with the train.break.any permission (default: OP) can break trains anyway.
waitdistance waitdelay waitacceleration waitpredicted		See the Wait Property section
route add route set route remove route clear	destination_name	Adds/removes/clears/sets the destinations of the route set for a train. Destinations are added at the end.
route load loadroute	my_saved_route	Loads a previously saved route by name.

Set name

The name property alters the name of the train. To account for multiple trains being renamed, and because every train needs a unique name, the # value is added as a counter-based replacement. For example, the first train passing over the property sign with name value: Intercity#A would be named Intercity1A and the second Intercity2A, and so on. You can use this in combination with the spawner sign to spawn trains with a fixed naming system. This naming system can then be used for remote control to control all trains of a certain spawner or category.

Wait Property

The wait properties control when a train will automatically slow down. This can be used to slow a train down when obstacles are ahead of the train. This feature largely replaces the older waiter sign, and is a lot more intelligent:

• Maintain distance with other trains up ahead
• Slow down approaching occupied mutex zones
• Slow down approaching a blocker sign that will block the train

The following 'wait' properties exist:

Property	Example Value	Description
waitdistance	20.5	Distance to keep between this train and the train ahead, in blocks. The train will slow down or stop completely maintaining distance.
waitacceleration	20kmh/s	The rate of acceleration at which trains slow down or speed up when obstacles ahead appear or disappear. When specifying two numbers, the first number is the rate speeding up, the second number the rate slowing down. This can be set without the waitdistance, and will be used to slow down when approaching blockers or mutexes.
waitdelay	30	When the train is completely stopped due an obstacle, waits at least this delay in seconds until starting to move again
waitpredicted	false	Controls whether the path the train will take is predicted. By default on. When enabled, this will take into account switcher signs and where the train will be routed to when checking for obstacles.

They can also be configured with the /train wait <property> <value> set of commands.