TrainCarts/Attachments/Physical/zh-cn

« 返回

正在自定义矿车的物理属性。

一列绕圈的自定义矿车，矿车长度控制间距，车轮的位置控制矿车的转动半径。

物理面板位于顶部（根）配件中，用于配置矿车的长度和车轮的位置，分别控制矿车与矿车之间的间距和矿车的转向半径。位于该面板时可以预览矿车当前尺寸的边框。

矿车长度

This controls the length of the cart. Multiple connected carts maintain distance between each other with a gap between them. This length controls the spacing this cart takes up in this linked chain.

车轮间距

This controls how far from the center of the cart the front and back wheels are positioned. Further-spaced wheels turn more smoothly. If your custom train includes actual wheels, it helps to position the wheels in roughly the same place for realistic tracking on the rails. The wheel positions are displayed using ender pearls.

Wheel Offset

If your wheels are not exactly centered, the offset allows for adjusting this. Usually this should be left 0.