TrainCarts/Attachments/Sequence/PianoRoll

From BergerHealer Wiki
Revision as of 23:14, 30 December 2023 by Bergerkiller (talk | contribs) (Created page with "« Go back thumb|Sequencer MIDI Piano Roll == Introduction == The piano roll acts a...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

« Go back

Sequencer MIDI Piano Roll

Introduction

The piano roll acts as a digital music sheet to configure melodies or repeating effects. Vertically are pitch classes, or octaves, and horizontally is time.

Menu

Notes

Notes can be placed down after activating the place note button. This automatically focuses the piano roll, where with W/A/S/D movement controls the position of the cursor on the piano roll can be changed. The note is toggled with spacebar.

It is also possible to first select a pattern of notes, and then place this pattern down multiple times on the piano roll. Placing the pattern down on top of an existing pattern removes the pattern again.

The effect is previewed once when the note is placed down.

Clear Chart

Use the clear chart button to clear everything, which cannot be reversed.

Preview

Preview the MIDI sequence using the play button, or stop it again to abort. Displays a position marker as the MIDI sequence plays.

Configuration

Sequencer MIDI Piano Roll Configuration

The music chart settings can be configured by activating the gear icon. Most important are the beats per minute, which controls the tempo of the sequence. The time measure and pitch classes can be used to change the resolution of the chart. If you need additional pitch ranges, increase the number of pitch classes. If you need additional notes per beat, change the note value. The time signature is more for the music literate among us.