TrainCarts/Velocity
Revision as of 21:25, 7 November 2020 by Bergerhealer Wiki>Bergerkiller (Created page with "« Go back == Introduction == Velocity is the speed of the train. Speed syntax is important for Launcher signs, Trai...")
Introduction
Velocity is the speed of the train. Speed syntax is important for Launcher signs, Speed limit property and any other places where a speed is specified.
As a base unit TrainCarts uses blocks/tick This can be understood as: Move the train by <value> blocks every tick. A single tick is 1/20 second. All units are case-insensitive. Some mix-matching of units is possible, for example, you can use 20m/h even though it is not listed. For a change in velocity, see TrainCarts/Acceleration.
Syntax
| Input | blocks/tick | Explanation |
|---|---|---|
| 0.2 0.2/t |
0.2 | When no unit is specified, the value is in blocks/tick |
| 20m/s 20/s |
1.0 | Unit in blocks/second (or m/s). The m before the unit is optional. |
| 30km/h 30kmh 30kmph |
0.4167 | Unit in kilometers/second. Can be specified as km/h, kmh or kmph. |
| 3.28ft/s | 0.05 | Unit in feet/second |
| 1.0mi/h 1.0mph |
0.022352 | Unit in miles/hour. mi/h can be specified as mph. |