Difference between revisions of "TrainCarts/Physical/zh-cn"

From BergerHealer Wiki
Jump to navigation Jump to search
(Created page with "== 十字交叉路口 ==")
(Created page with "thumb|使用木质和石质压力板创建一个十字交叉路口 压力板充当一个简单的十字交叉路口,允许每侧都能通...")
Line 10: Line 10:
 
== 十字交叉路口 ==
 
== 十字交叉路口 ==
  
<div lang="en" dir="ltr" class="mw-content-ltr">
+
[[Image:Traincarts crossing.png|thumb|使用木质和石质压力板创建一个十字交叉路口]]
[[Image:Traincarts crossing.png|thumb|X-Crossing using a wooden and stone pressure plate]]
+
压力板充当一个简单的十字交叉路口,允许每侧都能通过并到达对侧。如果对侧没有连接到铁轨,压力板会充当一块简易铁轨。木质和石质压力板都能用来充当十字交叉路口。
Pressure plates act as a simple X-crossing, letting both sides continue to the other side. If one side is not connected to another rail, it will act as a simple one-way rails. Both wooden and stone pressure plates can be used.
 
</div>
 
  
  

Revision as of 02:00, 2 September 2024

Other languages:
English • ‎中文 • ‎中文(中国大陆)‎

« 返回


介绍

TC 对物理特性进行了修改。压力板和梯子可以充当铁轨,并且矿车可以放置在它们上面。插件会将这些方块识别为铁轨。


十字交叉路口

使用木质和石质压力板创建一个十字交叉路口

压力板充当一个简单的十字交叉路口,允许每侧都能通过并到达对侧。如果对侧没有连接到铁轨,压力板会充当一块简易铁轨。木质和石质压力板都能用来充当十字交叉路口。


Vertical rails

A ramp made using ladders and sloped tracks

Ladders can be used as vertical rails. Trains will glide next to them nicely, and exit them without problems. To get trains off the vertical rails, put a sloped track connected to it. This connection is automatically handled by the plugin. To change from horizontal to vertical without losing momentum, put a sloped track between the two rails.

Stations also work vertically, you then power above or below the sign to change directions, or use the up and down directions.