TrainCarts/Physical [ja]

From BergerHealer Wiki
Jump to navigation Jump to search
(Created page with "== 交差路 ==")
(Created page with "thumb|木と石の感圧板を用いた交差路 感圧板はシンプルな十字路として振る舞います。いずれの方向からも列車が進入でき、そして向かいへと通過していきます。ただし、もしひとつの面が別のレールと接していなければ、単純に一本道のレールとして動作します。なお、この用途には木と石の感圧板を使うことができます。")
Line 7: Line 7:
== 交差路 ==
== 交差路 ==


<div lang="en" dir="ltr" class="mw-content-ltr">
[[Image:Traincarts crossing.png|thumb|木と石の感圧板を用いた交差路]]
[[Image:Traincarts crossing.png|thumb|X-Crossing using a wooden and stone pressure plate]]
感圧板はシンプルな十字路として振る舞います。いずれの方向からも列車が進入でき、そして向かいへと通過していきます。ただし、もしひとつの面が別のレールと接していなければ、単純に一本道のレールとして動作します。なお、この用途には木と石の感圧板を使うことができます。
Pressure plates act as a simple X-crossing, letting both sides continue to the other side. If one side is not connected to another rail, it will act as a simple one-way rails. Both wooden and stone pressure plates can be used.
</div>





Revision as of 08:18, 16 June 2026

Other languages:

概要

TrainCartsはいくつかの物理法則について、変更や追加を行います。プラグインは感圧板やはしごをレールと同じように認識し、実際にトロッコがその上を走ることができます。


交差路

木と石の感圧板を用いた交差路

感圧板はシンプルな十字路として振る舞います。いずれの方向からも列車が進入でき、そして向かいへと通過していきます。ただし、もしひとつの面が別のレールと接していなければ、単純に一本道のレールとして動作します。なお、この用途には木と石の感圧板を使うことができます。


Vertical rails

A ramp made using ladders and sloped tracks

Ladders can be used as vertical rails. Trains will glide next to them nicely, and exit them without problems. To get trains off the vertical rails, put a sloped track connected to it. This connection is automatically handled by the plugin. To change from horizontal to vertical without losing momentum, put a sloped track between the two rails.

Stations also work vertically, you then power above or below the sign to change directions, or use the up and down directions.