TrainCarts/Signs/Ejector

From BergerHealer Wiki
Revision as of 12:26, 3 September 2024 by Bergerkiller (talk | contribs) (Marked this version for translation)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search
Other languages:

« Go back


Introduction

The ejector sign can eject (let exit) passengers of minecarts. You can place it at a station to eject the entire train in one go, or do it for carts individually.

The sign requires power to work.


Syntax

Signtemplate.png
[train]
eject
0/12/12
90/0

First line: [train] to eject all minecarts in the train, [cart] to eject minecarts individually

Second line: eject to teleport relative to the minecarts, eject at to teleport at absolute world coordinates


Third line

When eject is used on the second line:
Optional offset to eject players, relative to the minecarts. Offset 'axis' are delimited by '/'-signs. The first value sets the forward/backward offset, the second up/down and the third left/right.
Example (left of the train): 0/0/4

When eject at is used on the second line:
The exact x/y/z world coordinates to teleport the players to
Example: 154/67/-2442


Fourth line

Optional angle players look to after being ejected. The first value sets the 'yaw', the angle to look left and right (90 is straight ahead, 180 is to the right, 0 to the left and 270 is facing backwards). The second sets the 'pitch', the angle to look up (negative) and down (positive).


Remote Control

You can remotely eject trains too. Say your train is called train01, then you use the following on the sign:

Signtemplate.png
[train train01]
eject
0/2/0