Difference between revisions of "TrainCarts/Physical/zh-cn"

From BergerHealer Wiki
Jump to navigation Jump to search
(Created page with "TC 对'''物理特性'''进行了修改。压力板和梯子可以充当铁轨,并且矿车可以放置在它们上面。插件会将这些方块识别为铁轨。")
 
(5 intermediate revisions by the same user not shown)
Line 8: Line 8:
  
  
<div lang="en" dir="ltr" class="mw-content-ltr">
+
== 十字交叉路口 ==
== X-crossing ==
 
</div>
 
  
<div lang="en" dir="ltr" class="mw-content-ltr">
+
[[Image:Traincarts crossing.png|thumb|使用木质和石质压力板创建十字交叉路口]]
[[Image:Traincarts crossing.png|thumb|X-Crossing using a wooden and stone pressure plate]]
+
压力板充当一个简单的十字交叉路口,允许每侧都能通过并到达对侧。如果对侧没有连接到铁轨,压力板会充当一块简易铁轨。木质和石质压力板都能用来充当十字交叉路口。
Pressure plates act as a simple X-crossing, letting both sides continue to the other side. If one side is not connected to another rail, it will act as a simple one-way rails. Both wooden and stone pressure plates can be used.
 
</div>
 
  
  
<div lang="en" dir="ltr" class="mw-content-ltr">
+
== 垂直铁轨 ==
== Vertical rails ==
 
</div>
 
  
<div lang="en" dir="ltr" class="mw-content-ltr">
+
[[Image:TrainCarts Vertical.png|thumb|使用梯子和倾斜的铁轨创建的斜坡]]
[[Image:TrainCarts Vertical.png|thumb|A ramp made using ladders and sloped tracks]]
+
梯子可以充当垂直铁轨。列车可以在梯子侧边丝滑地行驶,并且可以毫无毛病地驶出。要让列车行驶在垂直铁轨上,你需要使用倾斜的铁轨来连接。插件会自动识别并连接它们。要从水平变为垂直,你需要在两条轨道间放置一个倾斜的铁轨。
Ladders can be used as vertical rails. Trains will glide next to them nicely, and exit them without problems. To get trains off the vertical rails, put a sloped track connected to it. This connection is automatically handled by the plugin. To change from horizontal to vertical without losing momentum, put a sloped track between the two rails.
 
</div>
 
  
<div lang="en" dir="ltr" class="mw-content-ltr">
+
车站同样可以垂直放置,然后通过控制牌上方或者下方的红石充能来改变方向,或在控制牌中使用 up 和 down(上和下)设置方向。
Stations also work vertically, you then power above or below the sign to change directions, or use the up and down directions.
 
</div>
 

Latest revision as of 02:14, 2 September 2024

Other languages:
English • ‎中文 • ‎中文(中国大陆)‎

« 返回


介绍

TC 对物理特性进行了修改。压力板和梯子可以充当铁轨,并且矿车可以放置在它们上面。插件会将这些方块识别为铁轨。


十字交叉路口

使用木质和石质压力板创建十字交叉路口

压力板充当一个简单的十字交叉路口,允许每侧都能通过并到达对侧。如果对侧没有连接到铁轨,压力板会充当一块简易铁轨。木质和石质压力板都能用来充当十字交叉路口。


垂直铁轨

使用梯子和倾斜的铁轨创建的斜坡

梯子可以充当垂直铁轨。列车可以在梯子侧边丝滑地行驶,并且可以毫无毛病地驶出。要让列车行驶在垂直铁轨上,你需要使用倾斜的铁轨来连接。插件会自动识别并连接它们。要从水平变为垂直,你需要在两条轨道间放置一个倾斜的铁轨。

车站同样可以垂直放置,然后通过控制牌上方或者下方的红石充能来改变方向,或在控制牌中使用 up 和 down(上和下)设置方向。